Infrared Optics2019-02-18T16:12:42+01:00

Infrared Optics

Polymer Optics Limited is a leading suppliers of Passive Infra-Red (PIR) lenses and PIR lens design services to the security and lighting control industries. While our lenses are mostly used for security and lighting applications they have numerous other area sensing applications for products such as fan control, door activation, temperature measurement and general energy management.Polymer Optics’ designers have been at the forefront of PIR lens design for over twenty years. Our in-house developed ray-trace software can accurately predict the performance of the PIR lens before committing to tooling. We also develop novel manufacturing methods for precision tooling manufacture and high quality moulded lenses.

New rapid manufacturing techniques allow fully working prototype lenses to be made within ten working days of design completion and a much faster route to final production tooling.Polymer Optics’ patented Free-form Fresnel (FF) technology ensures the lens detection zones are undistorted and highly focused for higher resolution and more reliable zone sensing.These ground-breaking techniques improve our design and manufacture and ensure we remain at the forefront of the PIR industry.

Infrared Optics

3D PIR lens for lighting control. The lens has 16 detection zones and 180deg field of view.

Contact Us

Polymer Optics Limited
The Hall, Priory Hill, Rugby Road, Wolston, Coventry CV8 3FZ
+44 (0)2476 937394


Infrared Optics

Raytrace simulation showing PIR detection zones projected onto walls and ceiling. This type of simulation tool helps visualise the performance of the lens and confirms the product design performance.

Infrared Optics

Raytrace simulation showing predicted signal response across PIR detection zones. These simulations are used to ensure that an acceptable signal is available from all the Fresnel facets, to guide the product’s electronic design.

Infrared Optics

Conventional Fresnel lens gives distorted zone image.

Infrared Optics

POL Fresnel lens gives undistorted zone image.

POL’s new Free-form Fresnel (FF) lens technology helps to reduce distortion and improve lens focal properties.


Using POL’s Free-form Fresnel (FF) lens technology, it is now possible to make high performance flat lens arrays, which previously could only be achieved in 3D formed lens products. POL has used this new technology in a 31 detection zone PIR lens array called the FF31 and is available as a standard product. Part number 452

Previously it was only possible to maintain zone definition by tilting the Fresnel facets, meaning that the lens had to have a 3D appearance.

Using POL’s new lens facet design, it is now possible to create a more aesthetically pleasing flat lens, which can be flush fitted into low profile wall and ceiling mounted detectors.

Infrared Optics

We are proud to work with